Difference between revisions of "3.3.1 Fit-for-purpose working environment"

From EQIPD
Jump to: navigation, search
(Created page with "== ​​​A. Background & Definitions == The working environment must be appropriate to ensure adequate and safe working practices and to minimize disturbance that would in...")
 
 
Line 27: Line 27:
  
 
tba
 
tba
 +
 +
  
 
----------------
 
----------------

Latest revision as of 08:42, 3 September 2020

​​​A. Background & Definitions

The working environment must be appropriate to ensure adequate and safe working practices and to minimize disturbance that would interfere with the validity of the study.


B. Guidance & Expectations

  • Experimental rooms must be suitable to meet the requirements of the study.
  • Storage rooms for samples, reagents, supplies and equipment should provide adequate protection against deterioration or contamination. Safe storage for hazardous substances should be ensured.
  • Animal housing should be performed under controlled conditions (see 3.4.1.4 Animal environmental conditions).
  • Handling and disposal of wastes should be carried out in such a way as not to jeopardize the integrity of studies (collection, storage, decontamination, transportation).
  • Archiving conditions should protect contents from untimely deterioration.

Extra care has to be taken:

  • Where important, environmental parameters such as temperature and humidity should be monitored and acceptance ranges should be defined.
  • Where appropriate, there should be contingency plans in case of power failure or other disruption.
  • Where special facilities are used they must be regularly checked and maintained (e.g. fume cupboards, heating, ventilation and air conditioning (HVAC), cold rooms).


​PLEASE DO NOT FORGET​

  • Keep maintenance records of special facilities (e.g. fume cupboards, heating, ventilation and air conditioning (HVAC)​, cold rooms).
  • In case of suboptimal working/storage environment conditions (e.g. acceptance ranges for temperature or humidity are exceeded) this should be documented in the study along with impact assessment.
  • Any regulations that define additional standards associated with specific laboratory hazards (e.g. ionizing radiation, controlled substances, biohazard, animal allergens) must be adhered to.


C. Resources

tba



back to Toolbox

Next item: 3.3.2 Processes to enable computerized and non-computerized systems being suitable for intended use